INVERSYS PLUS ᵖᵐ SERIES [NEW]

5-37 kW

7,5-8,5-10-13 bar

0,25-6,64 m³/min

Oil Injected, Direct Coupled, Variable Speed

Rotary Screw

Air Compressors

Thanks to its high quality equipment and advanced engineering solutions, it provides efficient and flexible use according to your industrial production needs.

Advantages

One of the products in its class that takes up the least footprint.
It saves up to 55% energy.
It operates at constant output pressure value.
It has wide operating pressure range (5-13 bar).
It provides effective and energy efficient compressed air production even in case of highly variable compressed air requirements.
Long component life cycle thanks to soft start.
It has the feature of protecting against the adverse effects of peak currents.
When compared with compressors without an inverter for applications with variable requirements
If requested, it is produced specially according to the need.

General Features

E5 high efficiency-class IPM electric motor
Operating with low noise level
Soft start with variable speed power transmission
Dryer and tank mounted option (up to 22 kw)
Integrated dryer and heat recoveryrecovery option (18 kW and above)

Screw Block

Zero transmission losses by compact direct power transmission
High performance even at low speeds
New rotor profiles for reduced loss air production
Next gen bearing design for improved load bearing capabilities
Thanks to low rotor speeds, a long service life

Electric Motor

IE5 Ultra Premium energy efficient Internal Permanent Magnet (IPM) electric motor Compact design
Low noise level
F-class insulation
Optimum oil cooling at all speeds for high efficiency
Low noise levels
Grease-free lubricated motor bearings

Heat Recovery Options For Even More Savings 🌱

In compressor, a high amount of heat is released during the compression of the air. A large amount of heat is recovered with a suitable oil/water exchanger placed at the oil tank outlet ofthe compressor. The hot water obtained with the heat recovery can be used in many areas in your facilities. By directing the hot air coming out of the compressor, a room can be heated when heating is required, or hot air can be given outside with thermostatic control, in accordance with seasonal changes. In this way, savings from the heating system and natural gas are provided.80% of the compressor’s total energy consumption can be recovered.

VSD TECHNOLOGY

Intake System

Air circulation inside the cabin with negative pressurized cabin andsealed cover structure.
Fresh air intake thanks to hot air evacuated at a point away from the suction.
Low noise level thanks to intake blinds.
(Inversys Plus ᵖᵐ 11-37)

Air Filter

99.9% efficiency in particle separation down to 3 microns
Low pressure loss (starting pressure fall <3mbar)
Easy maintenance
Long service life

Air & Oil Separator

Effective separator elements keep the amount of oil in the outlet air low (1-3 mg/m³) for highquality compressed air
Spin-on or immersion type separator design depending on the product series
Easy-to-detach spin-on type separator
(Inversys Plus ᵖᵐ 5-22)
High-efficiency immersion type separator with long service life
(Inversys Plus ᵖᵐ 30-37)

Cooling System

emperature controlled axial fan (Inversys Plus ᵖᵐ 5-15)
Optimum working temperature thanks to inverter controlled fans, provides additional energy efficiency (Inversys Plus ᵖᵐ 18-37)

Water Separator

Separation performance is >%99 even in very hot and humid conditions
Compact, integrated and unique design
(Inversys Plus ᵖᵐ 18-37)
High energy efficiency with minimal pressure loss
(Inversys Plus ᵖᵐ 18-37)

Controller

User-friendly display interface with 7” LED display
Group operation of up to 4 compressors
Possibility to choose Master/Slave compressor
Ability to connect to customer DCS system via ModbusTCP
Compact construction with integrated driver and controller
Weekly scheduler for starting/stopping the machine at 2 different time intervals can be individually set for each day of the week
Dual PID feature can run simultaneous PID for temperature and pressure
Pressure PID ensures energy-efficient operation by maintaining the pressure at the desired level
Temperature PID controls the fan speed to maintain the screw block’s most efficient operating temperature
All inverter and compressor control data are managed from a single point
Ability to determine co-aging times of the system with selectable parameters
Built-in phase sensor